Call
Every boiler fully fitted from £1,900 across Bridgend, with VAT, the flush and the filter included

Why a new boiler needs a system flush and a magnetic filter

Updated 28 September 2026 · 2 minute read

Over the years, the water in a heating system picks up rust and debris from the radiators and pipes. It settles as a black sludge. Connect a brand new boiler to that water and the sludge goes straight through it.

What sludge does

  • Blocks the narrow waterways inside the boiler’s heat exchanger.
  • Makes the pump work harder and wear sooner.
  • Leaves radiators cold at the bottom.
  • Makes the boiler noisy, often a kettling or banging sound.

The system flush

At installation the system is flushed with a cleaning chemical, to lift out loose sludge before the new boiler runs. It is included in our price as standard.

The magnetic filter

A magnetic filter is fitted on the return pipe to the boiler. It catches the iron particles still circulating and holds them in a chamber that is emptied at each yearly service. Most manufacturers need one fitted for the full warranty. It is included in our price as standard.

When a powerflush is needed

A powerflush is a deeper clean using a pump machine, and it takes longer. It is only needed where the system is genuinely dirty: radiators cold at the bottom, black water when a radiator is bled, or a history of blockages. We will tell you if your system needs one, and price it before you book. It is never added as standard.

Inhibitor

After the flush, an inhibitor is added to the water to slow down future corrosion. It is topped up at services.

See what is included in a boiler installation and boiler warranties explained. Or get a fixed price.

Get your fixed price for a new boiler in Bridgend

Five quick questions. Your answers open WhatsApp with everything written out, and we come back with a fixed, fitted price and a date.

Rather talk? Ring 07712 646488

Question 1 of 5
What boiler do you have now?
Call us Get my price